Spectrum Paper Towel Holder

The materials have been in contact with the victim (mask, valve, mouthpiece, splints . . ) must be passed under water, disinfected by immersion (5 min. ) And then dried with a clean paper; bleach , the disinfectant is ideal because it has a very broad spectrum of action. For rapid disinfection prior to return, you can use a disinfectant liquid soap (PLUREXID, diluted in water), rinse well and dry the material, this can be done at the patient's home or before leaving the hospital . The cell must be cleaned after each transport. We must eliminate waste by placing them in a plastic bag (except for sharp objects) and, ideally, place the bag in the hospital with the patient to ensure their destruction. Then cleaned briefly (for wet wiping) parts of the stretcher or mattress shell has been in contact with the patient and areas contaminated by projections. Bleach is again the ideal product for the disinfection of these parties. We leave all doors open to dry. The cell is emptied and cleaned completely, starting with the least dirty surfaces (ceiling, vertical surfaces) and ending with the ground. When the vehicle has been completely cleaned (see 4. 2) by its staff, it must be taken to a service that will provide disinfection using a special spray. The wounds are a gateway to all the surrounding microbes. We must therefore take certain precautions when taking care of wounded. Wounds should at least be protected by a sterile pack (compress) before transporting or gesture capital. This is the case of severe burns, sores or bleeding very dilapidated. At best, they must be washed (water and scrub) to remove debris (from the center of the wound outward) and then disinfected with an antiseptic. Of intervention, this action is generally limited to the placement of a swab of antiseptic on the wound. . .
Summary: 1. Decorative element, which is designed to be incorporated into furniture accessories, bathroom and others, is characterized by comprising a metallic base body, which, like a frame or enclosing structure (1) defines an inner space where a piece fits plug (4 ) essentially determined by an acrylic stone, immobilized with respect to surround said base body (1). 4. Decorative element according to any one of claims 2 or 3, wherein at least some of the gaps in low relief (6) are inserted decorative sconces (7) of different material. 5. Decorative element according to any of reivindicacionesanteriores, characterized in that the coupling between the insert (4) and surround the base body (1) incorporates an adhesive material (5). The present invention, as expressed in the title of this specification, refers to a decorative, essentially designed for deployment in furniture and bathroom accessories such as handles, drawers and other furniture, such as towel racks, porta- rolls of toilet paper holders. There are now known to apply various decorative furniture and bath fixing to handles of drawers, spectrum paper towel holder and other items, so that the fixing of such decorative elements in general presents a way to work these elements by casting techniques, of coletaje, etc. with little accuracy and a very restricted range of materials. The decorative element is the object of the invention is designed to be incorporated into other accessories such as drawer pulls, towel bars, paper holder, toilet paper and other accessories. It is characterized by using different materials and processes that ensure accuracy and fit of the different components, comprising a first base body preferably metallic material envelope, within which fits an insert artificial stone acrylic (Corian type etc. ) . These elements fit giving a sense of harmony and quality. The insert is placed under pressure within the element base defined by the body envelope, although it can ensure their placement and fixation with use of an adhesive material applied to the inner surface of the base surround inner surface that corresponds to the bottom and internal sides that surround the base body of metal material. Another feature of the invention is that in order to give greater distinctiveness and elegance to the whole decoration of the invention are performed on the face side of the slab or piece of artificial stone, at least one recess or hole in low- relief of a certain thickness and with a particular shape, so that the recess can be placed on a different wall material, which can preferably be colored lacquered wood, plastic or a metal piece itself. Next, to facilitate a better understanding of this specification and forming an integral part of it, some figures are attached in which an illustrative and not limiting has represented the object of the invention. Considering the numbering adopted in the figures, the decorative element is applicable to be implemented for furniture and bathroom accessories, determined from a base body 1 of metal enclosure that has a bottom 2 and side walls 3. The bottom 2 and side walls 3 define an inner space where you set an insert 4 materialized by an artificial stone acrylic pressure is embedded within the interior space of the base enclosure 1, adjusted against such artificial piece acrylic side walls 3 . On the other hand, the placement of the insert 4 can be secured using an adhesive 5 impregnated on at least part of the contact surfaces between the insert 4 and surround the base body 1. The insert 4 has a visible face in bas-relief holes that can be directly 6 a decorative trim. In this case, such bas-relief holes 6 may be impregnated with a substance decorative. Another possibility is that at least some of these gaps in bas-relief wall 6 can snap on 7 different materials and colors to achieve a wider range of possibilities in decorating element of the invention. Figure 6 shows a bathroom fixture determined by a brush holder 9, shown in Figure 7 a third bathroom fixture determined by a paper roll holder 10. 1. Decorative element, which is designed to be incorporated into furniture accessories, bathroom and others, is characterized by comprising a metallic base body, which, like a frame or enclosing structure (1) defines an inner space where a piece fits plug (4 ) essentially determined by an acrylic stone, immobilized with respect to surround said base body (1). 4. Decorative element according to any one of claims 2 or 3, wherein at least some of the gaps in low relief (6) are inserted decorative sconces (7) of different material. 5. Decorative element according to any of the preceding claims, characterized in that the coupling between the insert (4) and surround the base body (1) incorporates an adhesive material (5). . .
.